Door Monogram

Here's my newest Cricut project!  I'm loving monograms right now, so I decided to add my initial to my bedroom door to fancy it up a little. 

Here is my bedroom door before.

I chose the font from my Winter Wonderland Cartridge in 7 1/2 inch and printed it on sticky vinyl. 

Since this design was fairly intricate and I wanted to be sure it was level on the door, I used transfer paper to remove it from its backing.  I made sure to line up the bottom of the design with the red line on the transfer paper.  

To be sure that my initial wasn't crooked on the door.  I used my level on the transfer paper lines to position it correctly.

Make sure the vinyl is stuck to the door and carefully peel off the transfer paper.

Finished!

Beer Mug Etching

Recently I worked on some gifts I'm planning and got started on a really easy and cheap beer mug project.  I picked up a couple of glass mugs from the Dollar Tree.

Mustaches are having a moment right now so I decided that I was going to add a mustache to the front of the glass using my Cricut Lite Billionaire Cartridge. 

 I cut the mustache out of sticky vinyl putting all of my settings at 3 - 3 speed, 3 pressure, and 3 knife.  With these settings, the Cricut will cut only the vinyl and leave the backing uncut.  Peel off the design and you'll  be left with the negative cutout to use as the etching stencil.

 



Plus the cutout is really fun to play with!

 

 

Creepy!  haha The next step is adding your vinyl to the glass.  I lined my up with the top of the mug.  Make sure that the edges around the design are pressed down without any bubbles to be sure that you get a nice clean design with the etching cream.

 

 

I used Armour Etch to etch the design onto the glass.

 

 

Layer it on really thick.  I put the etching cream onto the glass using paint sponges that I got at the Dollar Tree.  They come in a package of 10 for $1.  I'm sure they could be rinsed and reused, but I just end up tossing them after I'm done since they are so cheap.

 

 

Rinse it off after 10 minutes and remove the vinyl stencil.  Use a little glass cleaner to shine it up.

 

 

Here's a close up.  I hope they like them!